Call us now: 0151 933 2026 or Email us
HD1025: Acoustic System MF17
Suitable for:
- domestic
- residential
- industrial
- education
- healthcare
- leisure
A complete acoustic system that can be used as flooring and ceiling solutions.This acoustic system is part of the separating floors solution and compromises of floating floor Hush 17, 18mm chipboard deck and the Hush MF ceiling system. It also makes use of the Hush slab 100 sound absorber and GYROC SOUNDBLOC board.
- Hush-Panel 17, all T&G joints glued using the Hush Bond Panel Adhesive, laid over 18mm/22mm chipboard deck, with all perimeters sealed using Hush-Seal 20.
- Install the Hush-MF system to the underside of the joists creating a minimum 150mm void from the underside of the joists to the back of the plasterboard lining. Install the Hush Slab 100 Sound Absorber tightly together within the ceiling void.
- Install a double plasterboard layer to the underside of the Hush-MF system. The plasterboard lining should consist of 19mm Plasterboard Plank and 12.5mm Soundbloc. Seal all perimeters with the Hush Acoustic Sealant prior to skimming.
For advice on the use of HD1025: Acoustic System MF17, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
Airborne  dB |
 dB |
| 49 | 57 | 50 |
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
