Call us now: 0151 933 2026 or Email us
HD1052: Twin Metal Stud Wall
Suitable for:
- domestic
- residential
- industrial
- education
- healthcare
- leisure
Hush have designed this system specifically for twin metal stud walls and is fully compliant to building regulations in England and Wales, Scotland and Northern Ireland.
- Construct two frames of 70mm metal stud and track. Ensure the metal stud and track is isolated from the floor and ceiling structure by the Hush Heavy Duty Isolation Tape.
- Ensure there is a minimum 50mm clear gap between the two stud frames. This gap should remain clear.
- Insulate within each stud frame using the Hush Slab 75 Sound Absorber. Ensure the Hush Slab is installed within the stud frames only and not the clear air gap between the stud frames
- Face each stud frame with two layers of 15mm Soundbloc Plasterboards. Ensure the perimeters of the plasterboards are sealed using the Hush Acoustic Sealant.
- Complies to UK Building Regulations Approved Document E (England & Wales), Section 5 (Scotland) and Part G (Northen Ireland)
- Can be used in new build, conversion and refurbishment developments
- A tried and tested method of creating a separating lightweight stud wall
- Excellent acoustic performance due to the clear void between the two stud frames
For advice on the use of HD1052: Twin Metal Stud Wall, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
