Call us now: 0151 933 2026 or Email us
Hush-Panel Premier 48
Suitable for:
- residential
- education
- healthcare
- leisure
Hush-Panel 48 is part of our range of acoustic floorboards and has been designed to enable an increase in floor height within refurbishment and new build projects. The combination of the Hushslab30™ resilient layer to the underside and high-density upper layer offers excellent acoustic qualities. The resilient layer can also take care of minor undulations of the floor surface.
For advice on the use of Hush-Panel Premier 48, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
 dB |
| 54 | 49 |
*based on Hush-System Premier incorporating Hush-Panel Premier 48 over TJI metal lattice joists
Test Data
Test data for field tests in compliance with Building Regulations Document E can be supplied upon request.
Product Data
- Can be laid over existing and new concrete or timber floors
- Comprises 18mm High Density P5 Moisture Resistant TG4 chipboard panels and a 30mm acoustic resilient layer of Hushslab30TM factory bonded to the underside.
- Overall Board Dimensions 2400mm x 600mm x 48mm. Overall nominal thickness 48mm
- FFL over concrete or timber deck 48mm
- For use in refurbishment and new build projects requiring impact sound insulation between separating floors
- Ideal for increasing floor height whilst upgrading floors
- Exceeds current Building Regulation requirements of Part E (England and Wales), Part H (Scotland) and Part G (Northern Ireland), when used as part of a recommended sound insulation system
- Comprises 18mm High Density P5 Moisture Resistant TG4 chipboard panels and a 30mm acoustic resilient layer of Hushslab30™ factory bonded to the underside.
- Easy to install in a single time-saving operation.
1. Lay the Hush-Panel 48 Floating Flooring in a conventional broken bond pattern.
2. Glue all teegee joints using Hush-Bond Panel Adhesive.
3. Leave a 10-15mm expansion gap around all perimeters and press in Hush-Seal 20 Perimeter Seal, ensuring that the floor floats freely of the walls, maintaining acoustic isolation.
At door thresholds, access hatches or in the absence of a teegee joint, Hush-Grommet Fixing Isolators can be used sparingly to eliminate ‘lipping’. No other fixings should be used when fitting the floating floor, as any restrictions can adversely affect performance. Skirting should be fitted a minimum of two or three millimetres clear of the floor surface. (PCT only).
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Hush-Panel Premier 48 Related Videos
Our Partners
