Hush-DF 10 Joist Insulation Strips have been designed as an economical acoustic layer to be used to the top of joisted construction and under timber floors. The Hush-10 joist insulation strip is a thin solution that is simply stapled to the top of the joists to reduce impact sound transmission through timber internal floors. When used in conjunction with the Hush slab 100 between the joists and the correct plasterboard lining it complies with the internal floor airborne regulations of 40 dB (RW) stated in Document E.
For advice on the use of Hush-DF 10 Joist Insulation, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Can be used as part of a system to achieve the internal floor regulations of 40 dB (RW) stated in document E.
Stapled directly on to timber joists or glued on to metal joists as part of a Hush internal floor construction to meet the internal floor regulation of document E.
Overall strip Dimensions
10mm thick x 50mm wide x 1.37m long
Overall nominal thickness of 10mm
Will compress to 8mm in use
Thin solution for isolating timber floors from joists
Excellent impact reduction
Easy to install
Improves acoustic performance in domestic dwellings
To be used with the Hush slab 100 to achieve document E compliance for an internal floor
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.