Call us now: 0151 933 2026 or Email us
HD1014: Hush-System 2003
Suitable for:
- domestic
- industrial
- healthcare
The Hush HD1014 Acoustic system is used for both floors and ceilings and consists of Hush 28 floating floor boards, Hush Seal 20 and absorbers. Full specification and installation is available from the Hush Acoustics team.
- Hush-Panel 28, all T&G joints glued using Hush-Bond, laid over 18/22mm &G chipboard/plywood or existing floorboards All perimeters of the Hush panel to be sealed in using the Hush-Seal 20.
- Hush-Slab 100 fitted between joists with Hush-Bars screw fixed to the underside of joists at 600mm centres
- Two layers of 15mm Soundbloc plasterboard to be installed to the underside of the Hush-Bars. Seal all perimeters prior to skimming.
- Complies with UK Building Regulations Approved Document E
- A fully developed economical sound insulation system between separating floors
- For use in refurbishment projects using timber joists
For advice on the use of HD1014: Hush-System 2003, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
Airborne  dB |
 dB |
| 51 | 58 | 49 |
Results based on 200mm timber joists at 450mm centres
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
