Call us now: 0151 933 2026 or Email us
HD1032: Hush Acoustic System LP/mF
Suitable for:
- domestic
- residential
- industrial
- education
- healthcare
- leisure
The Hush HD1032 Acoustic system is used for both floors and ceilings and consists of Hush Panel 28 Floating Floor, Hush seal 20 and the Hush slab Mineral wool sound absorber. Using the same principle as noise cancelling headphones. Noise from below the floor is absorbed by the pads beneath Hush Floor System and the sound above the floor will be reflected.
Full specification and installation is available from the Hush Acoustics team.
- Hush Panel 28, to be laid over existing floorboards or 18mm/22mm chipboard/plywood with all T&G joints glued using the Hush Bond Panel Adhesive.
- All perimeters of the Hush Panel to be sealed using Hush Seal 20 Perimeter Strip.
- Existing lath and plaster ceiling to be left in tact and made good if needed.
- Install the Hush MF ceiling to the underside of the lath and plaster ceiling construction. Ensure the Hush Acoustic Hangers are used and secured tightly to the existing joists. Ensure a 150mm void is created from the underside of the lath and plaster ceiling to the back of the plasterboard lining. Install the Hush Slab 100 Sound Absorber tightly together within the ceiling void.
- Install two layers of 15mm Gyproc Soundbloc to the underside of the Hush MF ceiling.
- Complies with UK Building Regulations Approved Document E, Section 5 and Part G
- A fully developed economical sound insulation system between separating floors
- For use in refurbishment projects using timber joists
For advice on the use of HD1032: Hush Acoustic System LP/mF, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
Airborne  dB |
 dB |
| 49 | 56 | 52 |
all Hush Compnents being used within the Hush System HD1032. Results also based on the lath and plaster ceiling to remain in tact and in good condition.
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
