Call us now: 0151 933 2026 or Email us

Acoustic Wall Systems

HD1055: Masonry Wall With Stud Lining

Suitable for:

  • domestic
  • residential
  • industrial
  • education
  • healthcare
  • leisure

The Acoustic Wall System for Masonry Walls is a sound insulation system that soundbloc acoustic plasterboard, the Hush mineral wool and a timber stud wall. This solution provides you with the data and materials needed to cut down on noise transmission from one room to another.

This system is perfect for use in residential or commercial buildings where soundproofing needs to be improved. It’s also an excellent solution for areas where there are limited construction resources because it’s quick and easy to install with minimal labor required on site.

Sound Insulation Materials

Hush Acoustics can supply the following materials to help you achieve similar sound reduction results in our test data

  • Construct a single frame of 50x100mm timber stud work independently from the existing masonry wall. Ensure there is a clear 25mm minimum gap from the existing masonry to the stud frame. Ensure the stud and track is isolated from the floor and ceiling structure using the Hush Heavy Duty Isolation Tape.
  • Insulate within the stud using the Hush Slab 100 Sound Absorber. Ensure the Hush Slab is installed tightly within the stud frame and the gap from the timber frame to the masonry wall should remain clear at all time.
  • Face the masonry side and the new timber frame with two layers of 15mm Soundbloc Plasterboards. Ensure the perimeters of the plasterboards are sealed with the Hush Acoustic Sealant.
  • Complies to UK Building Regulations Approved Document E (England & Wales), Section 5 (Scotland) and Part G (Northen Ireland)
  • Can be used in new build, conversion and refurbishment developments
  • A tried and tested method of upgrading an existing masonry wall to separating wall standards
  • Excellent acoustic performance due to the clear void between the existing masonry wall and the new timber stud wall

For advice on the use of HD1055: Masonry Wall With Stud Lining, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.

Acoustic Performance - Typical Results*

Impact lntw dB Airborne dntw dB
n/a 64

Results based on all Hush materials listed in the Hush System HD1055 data sheet being used. Results are also based on correct installation and all flanking paths being treated.

Test Data

Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.

Request a FREE CPD presentation.

Our Partners

fast track logo Nbs logo Riba logo Pasm logo