Call us now: 0151 933 2026 or Email us
HD1035: Hush Resilient Bar System TF Robust
Suitable for:
- domestic
- residential
- industrial
- education
- healthcare
- leisure
The Hush HD1035 is a resilient bar system that can be used for Robust Detail in timber frame.
- Install 18mm T&G chipboard and 19mm plasterboard plank in opposite directions with staggered joints over the Hush Batten 70 acoustic battens. Ensure the perimeters of the chipboard and plank are isolated using the Hush RD Flanking Strip. Ensure the Hush Batten 70 acoustic battens are installed at the correct centres over the structural deck.
- Incorporate the Hush Slab 100 Sound Absorber between the joists. To the underside of the joists
- install the Hush Deep Resilient Bars. The bars are to be installed horizontally to the joists at the required centres. 19mm Plasterboard Plank and 12.5mm Soundbloc secured to Hush-Bar Deep resilient bars. Seal all perimeters prior to skimming.
For advice on the use of HD1035: Hush Resilient Bar System TF Robust, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
Airborne  dB |
 dB |
| 50 | 65 | 59 |
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
