Call us now: 0151 933 2026 or Email us

HD1013 : Hush-System 2003 Plus

Suitable for:

  • domestic
  • residential
  • industrial
  • education
  • healthcare
  • leisure

The Hush System 2003 Plus is a proven timber separating floor and ceiling solution designed to meet and exceed the performance requirements of Part E of the Building Regulations. By combining Hush-Panel 32 acoustic flooring with resilient ceiling isolation, absorptive infill, and dense plasterboard linings, it provides exceptional airborne and impact sound reduction. This system is ideal for residential developments, student accommodation, and refurbishment projects where reliable and consistent acoustic performance is required.

System Components

  • Hush-Panel 32 acoustic flooring panels (all T&G joints glued with Hush-Bond).
  • Hush-Seal 20 Acoustic Sealant for perimeter sealing.
  • Hush-Slab 100 Sound Absorber tightly fitted between joists.
  • Hush-Bars fixed at 600mm centres to the underside of joists.
  • Two layers of 15mm Gyproc Soundbloc plasterboard to underside of Hush-Bars.

Installation Guidance

  • Lay Hush-Panel 32 acoustic flooring over the structural deck, gluing all T&G joints with Hush-Bond Adhesive.
  • Seal all perimeters using Hush-Seal 20 Acoustic Sealant.
  • Install Hush-Slab 100 Sound Absorber tightly between joists with no air gaps.
  • Fix Hush-Bars at 600mm centres to the underside of joists, positioned at right angles.
  • Secure two layers of 15mm Gyproc Soundbloc plasterboard to the underside of the Hush-Bars.
  • Seal all ceiling perimeters prior to skim finishing to maintain acoustic integrity.
  • Residential apartments and housing with timber separating floors.
  • Hotels, student accommodation, and care homes requiring noise control.
  • Commercial and mixed-use buildings with timber joist structures.
  • Refurbishment projects upgrading existing timber floors to meet Part E standards.
  • Fully Part E compliant – tested for both airborne and impact sound insulation.
  • Uses Hush-Panel 32 acoustic flooring for enhanced acoustic performance.
  • Incorporates resilient ceiling isolation with Hush-Bars and absorptive infill.
  • Suitable for timber joist constructions in new build or refurbishment.
  • Designed as a complete tested system for consistent and reliable performance.

For advice on the use of HD1013 : Hush-System 2003 Plus, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.

Acoustic Performance - Typical Results*

Impact lntw dB Airborne dntw dB ctr dB
55 55 49

Results based on 200mm timber joists at 450mm centres

Test Data

Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.

Request a FREE CPD presentation.

Our Partners

fast track logo Nbs logo Riba logo Pasm logo