Call us now: 0151 933 2026 or Email us
HD1012 : Hush-System 2003
Suitable for:
- domestic
- industrial
- healthcare
The Hush HD1012 Acoustic system is used for both floors and ceilings and consists of Hush 28 floating floor boards, joist strips seals and absorbers. Full specification and installation is available from the Hush Acoustics team.
- Hush-Panel 28, all teegee joints glued using Hush-Bond, laid over Hush-10 Joist Strips, secured to joist tops as per manufacturer’s instructions, with all perimeters sealed using Hush-Seal 20.
- Hush-Slab 100 fitted between joists with Hush-Bars screw fixed to the underside of joists at 600mm centres and at rightangles to the joists
- One layer of 12.5mm Gyproc Soundbloc plasterboard and one layer of 15mm Gyproc Fireline plasterboard secured to Hush-Bars. Seal all perimeters prior to skimming.
- Complies with UK Building Regulations Approved Document E
- A fully developed economical sound insulation system between separating floors
- For use in refurbishment projects using timber joists
- Provides a 1 hour fire resistance at ceiling level
For advice on the use of HD1012 : Hush-System 2003, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.
Acoustic Performance - Typical Results*
Impact  dB |
Airborne  dB |
 dB |
| 56 | 54 | 45 |
Results based on 200mm timber joists at 450mm centres
Test Data
Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.
Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.
Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.
Our Partners
