Call us now: 0151 933 2026 or Email us

Hush Acoustics Vibration System

Hush Vibration Control System

Suitable for:

  • domestic
  • residential
  • industrial
  • education
  • healthcare
  • leisure

The Hush Anti-Vibration System is a specialist vibration isolation solution designed to reduce the transmission of structure-borne noise and vibration within buildings. It is used to isolate floors, ceilings and building services from vibration generated by mechanical equipment, footfall, and airborne sound sources, helping to improve acoustic comfort in noise-sensitive environments.

The system is suitable for use in residential, commercial, education, healthcare and industrial buildings where controlling vibration and associated noise transmission is critical to overall acoustic performance.

Vibration transmitted through a building structure can significantly increase noise levels in adjacent rooms and occupied spaces. The Hush Anti-Vibration System works by isolating the vibration at source, preventing it from travelling through floors, ceilings and structural elements.

By reducing resonance and structural-borne sound paths, the system helps limit low-frequency noise, impact-related vibration and secondary acoustic issues often associated with mechanical and service installations.

  • Designed to reduce structure-borne noise and vibration transmission
  • Load-rated vibration isolation components
  • Suitable for floors, ceilings and mechanical service installations
  • Effective across a wide range of vibration frequencies
  • Specification-led system selected to suit individual project requirements
  • Reduces vibration transmission through building structures
  • Helps control low-frequency noise and resonance
  • Improves acoustic comfort in noise-sensitive environments
  • Suitable for use in residential, commercial and specialist buildings
  • Compatible with suspended ceilings, floating floors and M&E systems

Test Data

Vibration isolation performance is dependent on correct selection and installation of system components. Factors such as applied load, frequency range and avoidance of rigid connections can significantly influence overall effectiveness.

The Hush Anti-Vibration System is intended to reduce the transmission of vibration and associated structural-borne noise rather than provide a single tested separating floor or ceiling performance value.

For advice on the use of Hush Vibration Control System, as part of a system within any project, please contact our experienced technical team on 0151 933 2026 who will be happy to give comprehensive and practical advice to meet with your requirements.

Test Data

Test data for field tests in compliance with Building Regulations Approved Document E can be supplied upon request.

Full fitting instructions are supplied with all products and are available to download from the Installation Guides section.

Should you have any technical questions prior to or during installation, please call 0151 933 2026 for friendly and straightforward advice.

Request a FREE CPD presentation.

Our Partners

fast track logo Nbs logo Riba logo Pasm logo